Screen Innovations Solo/Pro 2 Installation Instructions Manual page 17

CONTROL 24V RS485 WITH
3RD PARTY - VIA SERIAL
There are several options to control a Solo 2 RS485
screen with 3rd party controls. To integrate with your
preferred solution see the corresponding programming
guide and/or the system manufacturers instructions.
Note: To change the programming (lower limit) you
will need either a SIFI or an RS485 limit setting tool.
• For connection to your control system refer to pinout
image (pg 21). Then use your control system's
programming guide to send commands to control
the screen. For further integratation help call support
at 512.832.6939.
RS485 Screen
RS485 Serial Conductors (refer to pg 5)
Control 24v RS485 - with 3rd party via Serial
Computer or
Control system
with serial port
28 29