Motor Accessories 24V Rs485; Storage And Transport - Screen Innovations Solo/Pro 2 Installation Instructions Manual

MOTOR ACCESSORIES
- 24V RS485
(purchased seperately)
SOMFY Data Hub
1870262
Data Hub
PRESET 1
PRESET 2
PRESET 3
Limit Setting Tool
STOP
Decoflex Wall Switch
Motor Accessories - 24v RS485
Bus Power
Supply
Bus Power Supply
OK
BACK
OPEN
STOP
LIGHT
CLOSE
0 1
SIFI

STORAGE AND TRANSPORT

Before storing or transporting Solo/Pro 2, make sure
the screen is fully retracted. Disconnect the motor
power supply and any control wiring to make sure the
screen does not deploy. Failing to do so may damage
the screen.
It is preferred to store or transport your Solo/Pro 2
horizontally. Shock and vibration experienced during
transportation may shift the screen material and cause
slight wrinkles. If this occurs, the wrinkles may be
removed in most cassettes by manually redistributing
the material with the following steps:
1. Bump the bottom of the weight bar up several
2. Use 2 fingers to pinch the material just above the
2
36 Storage and Transport
times along it.
middle of the weight bar and lightly pull on the
material to smoothe out any wrinkles at the weight
bar.
37