Running; Programming - Screen Innovations Solo Installation Instructions Manual

RUNNING

Solo and Solo Pro screens are very easy to operate.
The RF remote, supplied with the screen, controls the
opening and closing from up to 40 feet away. Enjoy!

PROGRAMMING

Setting the Drop - Solo and Solo Pro are factory preset
to have 1" of drop, the distance between the top of
the viewing area and the cassette. The drop can be
adjusted up to 12"(4" for Short throw). To adjust the
drop, do the following:
1. Drop the screen to the lower limit by briefly
pressing the down button on the RF remote.
2. Hold the UP and DOWN buttons simultaneously
until the screen jogs once.
3. Use the DOWN and UP buttons to position the
viewing area vertically, up to 12"(4" for Short
Throw) from the bottom of the cassette.
Running and Programming
4. Once the viewing area is positioned, hold the
STOP button until the screen jogs once. This saves
the new lower limit. If this Step is not completed,
the screen will jog once after about 3 minutes,
indicating that it is no longer in program mode,
and the motor will only recall the previous lower
limit. No changes will be saved.
13 Running and Programming
DO NOT set the lower limit (top of viewing) more
than 12" (4" for Short Throw) from the cassette.
Doing so risks damaging the screen material.
1" - 12"
Drop 1" set
at factory up to 12" Max
NOTE: Max. drop for Short Throw is 4".
14