Screen Innovations Solo/Pro 2 Installation Instructions Manual page 15

1. Launch Windows File Explorer
2. Click on the "Network" tab
3. Double click on the SIFI, the default web browser will
launch
4. At the landing page, click the three lines in the top
right corner, then click "Settings"
5. Select the "SDN" tab on the top left
6. Press the spyglass to auto discover motors on the
RS485 network (may have to press it more than once)
7. Click on the motor you want to program
8. Name the motor
9. Right click on the down limit count
10. Move the screen up or down using the buttons in the
popup window
11. Click set to confirm the limit
12. Operate the screen up and then back down to verify
the position of the limit
Programming 24v RS485 - with SIFI
PROGRAMMING 24V RS485 -
WITH LIMIT SETTING TOOL
Setting the Drop:
Solo/Pro 2 is factory preset to have 1" of drop, the
distance between the top of the viewing area and the
cassette. The drop can be adjusted up to the MAX
DROP (see model number or order information for
your screen's MAX DROP) to customize the viewing
surface's vertical position.
NOTE: If a simplified system without a SIFI is setup
then changes to factory settings require a special
RS485 Setting Tool available from Screen Innovations
and ordered separately (Part # 9017142).
24 Programming 24v RS485 - without SIFI
(cont. on next pg)
25