Screen Innovations Solo/Pro 2 Installation Instructions Manual page 9

4. Secure the brackets to the wall or ceiling structural
supports using appropriate fasteners. Make sure the
brackets are along the same level line. Install the
terminal block bracket next to the left bracket. This
bracket is used to hold the power and/or controls
terminal block easily out of sight.
terminal block bracket
Solo/Pro 2 - Installation
5. Ensure the wall bracket lever is down.
6. Connect the screen terminal block to the pre-wire
terminal block. Then press the connected terminal
block into the mount.
12 Solo/Pro 2 - Installation
Proper position
for installing
screen
(cont. on next pg)
13