Wiring Example For The Factory Settings - Siemens SINAMICS G110M Getting Started

Commissioning

4.2 Wiring example for the factory settings

Table 4- 1 Components and tools for commissioning and data backup
Component or tool
Operator Panel IOP Handheld Kit - Version 1.5 or later
Optical cable Required for using IOP Handheld Kit with CU240M
STARTER Commissioning tool (PC software) - Version 4.3.3 or later
StartDrive Commissioning tool (PC software) - Version 12 or later
PC Connection Kit Contains the 3 m USB cable necessary to connect your
converter to a PC.
Optional memory card for storing and
transferring the converter settings
4.2 Wiring example for the factory settings
To ensure that the factory setting can be used, you must wire your drive as shown in the
following examples.
Factory pre-assignment of the interfaces on the drive
For a complete technical specification of the individual connections, as shown in the
following diagram, please refer to following figures:
● Figure 3-8 SINAMICS G110M CU240M USS terminal diagram (Page 57)
● Figure 3-9 SINAMICS G110M CU240M PROFIBUS terminal diagram (Page 58)
● Figure 3-10 SINAMICS G110M CU240M PROFINET terminal diagram (Page 59).
64
Order number
6SL3255-0AA00-4HA0
3RK1922-2BP00
You can obtain STARTER on a DVD
(Order number: 6SL3072-0AA00-0AG0)
and it can be downloaded:
STARTER download
(http://support.automation.siemens.com/
WW/view/en/26233208)
You can obtain StartDrive on a DVD
(6SL3072-4CA02-1XG0) and it can be
downloaded: StartDrive download
(http://support.automation.siemens.com/
WW/view/en/68034568)
6SL3255-0AA00-2CA0
SD card 6SL3054-7EF00-2BA0
Getting Started, 09/2014, FW V4.7, A5E31298643B AC
SINAMICS G110M Getting Started