Commissioning; Insert The Storage Tray Baseplate; Switching The Unit On And Off - Dentsply Sirona CEREC SpeedFire Operating Instructions Manual

4 Transport and commissioning
4.6 Commissioning
32
4.6

Commissioning

4.6.1

Insert the storage tray baseplate

➢ Place the baseplate also supplied into the storage area provided
above the fan.
4.6.2

Switching the unit ON and OFF

Switch on the unit
NOTICE
Only switch on the unit once you have connected the network cable.
1. Use the main switch on the rear of the unit to switch it on.
2. Press the start button on the control panel until the unit's strip of LEDs
lights up.
The unit completes a system check and starts the application
software.
Switching the unit off
1. To switch off the unit again, press and hold the start button on the
control panel for several seconds.
or
You can also use the main switch on the rear of the unit to switch
➢
it off.
Open door
1. Open the door in order to insert the door insulation also supplied.
2. Go to the Settings menu /
activate the opening of the door.
3. Close the menu after opening in order to arrive at the main view.
Operating Instructions CEREC SpeedFire
"Service" "open/ close door"
/
D3639.201.01.04.02 10.2017
Dentsply Sirona
, in order to
65 71 165 D3639