Editing The User Menu - Sony HXC-FB80 Operating Instructions Manual

To return a menu item to the standard value
When an item is selected and the , pointer is displayed, pressing
and holding the menu control knob for 3 seconds restores the setting
value to the state in the reference file.
If 10 SEC CLEAR is set to ON on the <FILE CLEAR> page in the
FILE menu, pressing the control knob for another 10 seconds
restores the reference file value of the selected item to the default
state.
To exit menu operations
Set the DISPLAY/MENU switch to OFF.

Editing the USER Menu

You can select desired pages and items from the OPERATION,
PAINT, MAINTENANCE, FILE, and DIAGNOSIS menus and
register them in the USER menu.
If you specify pages or items frequently used for the USER menu,
you can easily call and use them.
The following pages are included in the USER menu by factory
default.
Menu page USER menu
No.
<VF OUT> U01
<VF DETAIL> U02
<FOCUS ASSIST> U03
<VF DISPLAY> U04
<'!' IND> U05
<VF MARKER> U06
<CURSOR> U07
<ZEBRA> U08
<SWITCH ASSIGN1> U09
<SWITCH ASSIGN2> U10
<LENS FILE> U11
<HEADSET MIC> U12
<INTERCOM> U13
<AUDIO> U14
<OUTPUT FORMAT> U15
<TEST OUT> U16
<SDI OUT> U17
<TRUNK> U18
<ROM VERSION> U19
For the items on each page, see "OPERATION Menu" (page 46),
"MAINTENANCE Menu" (page 57), "FILE Menu" (page 62), or
"DIAGNOSIS Menu" (page 63).
The USER MENU CUSTOMIZE menu allows you to configure the
USER menu as follows.
• Creating a new menu page and selecting and adding (registering)
items that you use very frequently from multiple menu pages.
• Deleting (unregistering) added items.
• Changing the order of added items.
• Adding (registering) a menu page (new page you create or
existing menu page) to the USER menu
• Deleting (unregistering) a page from the USER menu
Source menu / Page No.
OPERATION 08
OPERATION 04
OPERATION 05
OPERATION 01
OPERATION 02
OPERATION 03
OPERATION 07
OPERATION 06
OPERATION 09
OPERATION 10
FILE F04
OPERATION 12
OPERATION 13
MAINTENANCE M07
MAINTENANCE M09
MAINTENANCE M10
MAINTENANCE M11
MAINTENANCE M12
DIAGNOSIS D03
• Changing the order of pages of the USER menu.
Editing by items
The USER MENU CUSTOMIZE menu allows you to create a new
page for the USER menu and add any item.
While the EDIT page contains factory-preset items, the USER 1
EDIT to USER 19 EDIT pages are all blank in their initial state. Up
to 10 items can be selected and registered to these pages from
different menu pages.
To add items to a page
1
Select USER MENU CUSTOMIZE on the TOP MENU
screen (see page 35).
If this is the first time the USER MENU CUSTOMIZE menu
has been displayed, the CONTENTS page appears.
CONTENTS
xx
01.EDIT PAGE
02.USER 1 EDIT
03.USER 2 EDIT
c
04.USER 3 EDIT
05.USER 4 EDIT
06.USER 5 EDIT
07.USER 6 EDIT
08.USER 7 EDIT
09.USER 8 EDIT
10.USER 9 EDIT
11.USER 10 EDIT
12.USER 11 EDIT
13.USER 12 EDIT
14.USER 13 EDIT
If the menu has been used before, the page last accessed
appears.
2
If the CONTENTS page is displayed, rotate the menu
control knob to move the , pointer to any of USER 1
EDIT to USER 19 EDIT and press the menu control knob
to display the page.
If a different page is displayed, rotate the menu control
knob until the desired page appears, then press the menu
control knob to select the page.
Example: If the USER 2 EDIT page is selected
USER 2 EDIT
c
37
E00 TOP
E03 TOP