Rear - Sony HXC-FB80 Operating Instructions Manual

Rear

For the pin assignment of each connector, see "Pin Assignment"
(page 68).
For details about removing the rear cover, see "Removing the rear
cover" (page 17).
a PGM LEVEL (program level) knob/assignable button
Adjust the intercom PGM audio level.
When connected with the HXCU-FB80, this adjusts the PGM audio
level input from the camera control unit.
In standalone operation mode, this adjusts signal level input on the
SDI I/O connector.
No function is assigned to the assignable button by factory default.
You can have a conversation on the intercom line while the button is
pressed by assigning the function that turns the intercom
microphone ON using REAR ENC SW on the <SWITCH
ASSIGN2> page in the OPERATION menu.
b RET2 (return video 2) selector switch
Select the return video signal (2, 3, 4) displayed when the button
assigned with the return video 2 function is pressed.
(With rear cover removed)
c RET1 (return video 1) button
Displays the return video 1 signal in the viewfinder while this button
is pressed.
d INTERCOM (intercom volume) knob
Adjust the intercom volume level.
When connected with the HXCU-FB80, the intercom volume level
can also be adjusted using the INTERCOM LEVEL knob on the rear
of the camera.
In standalone operation mode, you can assign a function to this knob
using REAR VR on the <VR ASSIGN> page in the OPERATION
menu.
e INTERCOM MIC (intercom microphone) switch
The switch function varies depending on the PANEL TYPE setting
on the <INTERCOM> page in the OPERATION menu (factory
default: CE).
When the PANEL TYPE setting is CE
Functions as the intercom microphone line selector switch.
PROD: Output the microphone on the PROD line.
OFF: Turn the microphone OFF.
ENG: Output the microphone on the ENG line.
When the PANEL TYPE setting is UCJ
Functions as the intercom line and microphone ON/OFF selector
switch.
PROD: Select the PROD line and turn the microphone OFF.
OFF: Select the ENG line and turn the microphone OFF.
ENG: Select the ENG line and turn the microphone ON (output on
ENG line).
You can have a conversation on the selected line while the
assignable button on the rear is pressed by assigning the function
that turns the intercom microphone ON to the button.
Note
The intercom and microphone of the camera can be used when connected to
a CA-TX70.
The intercom is connected to the line selected using the INTERCOM switch
of the CA-TX70. ENG/PROD cannot be selected on the camera.
f CALL button
When you press this button, the red tally indicators on the connected
camera control unit and external control device (for example, RCP
or RM) will light up.
g TALLY indicators (red/green)
When the TALLY switch is set to ON, the tally indicator lights up
when a tally signal is input to the connected camera control unit or
a call signal is generated by pressing the CALL button.
h TALLY switch
Set to ON to activate the TALLY indicator function.
i Camera adaptor attachment
Attach an optional CA-TX70 HD Camera Adaptor and AC-DN10
AC Adaptor.
j EARPHONE jack (stereo, minijack)
Monitor the audio output from the intercom or audio signals input to
the AUDIO 1 IN and AUDIO 2 IN connectors.
Set the earphone output on the <EARPHONE> page in the
OPERATION menu.
The earphone volume level can be adjusted using the INTERCOM
LEVEL knob.
k Audio input 2 selector switch
Select the audio level input to the AUDIO 2 IN connector.
13