Attaching The V-Wedge Shoe Attachment; Using The Camera For The First Time - Sony HXC-FB80 Operating Instructions Manual

Reduced display mode
Displays the camera image at a reduced size, with the tally and other
indicators displayed in the spaces above and below the camera
image.
Use this mode when the clear visibility of the tally and other
indicators is more important.
Indicators are located at the top and bottom of the screen to indicate
the status of the camera and viewfinder.
a G TALLY (green tally) indicator (green)
Lights up when a green tally signal is input.
b R TALLY (red tally) indicator (red)
Lights up when a red tally signal is input.
c Y TALLY (yellow tally) indicator (yellow)
Not supported by the camera.
Note
In full-screen display mode, the display position of the tally indicators is
fixed in one location. Accordingly, only one R/G/Y tally indicator can be lit
at any one time, regardless of the signal that is input. The display priority of
the tally indicator is red, green, and yellow, in that order.
d [!] indicator (amber)
Using the '!' IND function, the '!' indicator appears when non-
standard settings are in effect.
e BATT (battery) indicator (red)
Lights up or flashes to indicate the status of the power supply to the
camera.
Lit: Significant voltage decrease
Flashing: Voltage decrease
f SAVE indicator (amber)
Not supported by the camera.
Attaching the V-Wedge Shoe
Attachment
To attach the HDVF-L750 Viewfinder supplied with the HXC-
FB80S or an optional HDVF-L770/HDVF-EL75, connect the V-
wedge shoe attachment supplied with the camera or viewfinder to
the camera and then attach the viewfinder to the attachment.
The procedure for attaching the attachment is given below.
For details about attaching a viewfinder, refer to the operation
manual for the viewfinder.
1
Remove the four plastic caps from the camera.
2
Attach the V-wedge show attachment (supplied) to the
camera using the hex wrench (supplied) and four hex socket
bolts (4×12, supplied).
3
Insert the viewfinder firmly into the V-wedge shoe
attachment.
A click sound occurs when properly attached.
Front-to-back position adjustment (when
HDVF-L770 or HDVF-EL75 is attached)
To attach an HDVF-L770 LCD Color Viewfinder or HDVF-EL75
HD Electronic Viewfinder, move the mount wedge on the bottom of
the viewfinder 15 mm toward the camera operator from the default
position.
For details about attaching, refer to the operation manual for the
viewfinder.

Using the Camera for the First Time

The camera is shipped with the area of use setting in an unset state.
To use the camera, you need to first set the area of use.
21
Plastic caps