Adjusting The Audio Level; Setting The Digital Extender Function - Sony HXC-FB80 Operating Instructions Manual

To output as SD-SDI
Menu page Page No.
<SDI OUT> M11
Note
SD-SDI output is not available when HDR is set.
To output as VBS
Menu page Page No.
<TEST OUT> M10
Note
VBS signal output is not available when HDR is set.
Constantly outputting a return video
• When a CCU is connected, one of the signals being supplied to the
CCU can be output from the camera.
• The last selected return signal is output.
To output as HD-SDI
Menu page Page No.
<SDI OUT> M11
Outputting the same image as that in the viewfinder
With HD-SDI, you can obtain a signal that includes the same
information as that being displayed in the viewfinder according to
the settings for VF MARKER, CHARACTER, VF DETAIL,
ZEBRA, etc. The individual ON/OFF and other settings for adding
information are common to those for the viewfinder. The output is
synchronized with the switching of Y, R, G, B, or return signal in the
viewfinder.
To output as HD-SDI
Menu page Page No.
<SDI OUT> M11
To output as TEST OUT
Menu page Page No.
<TEST OUT> M10
Outputting a prompter signal
The VBS signal supplied to the PROMPTER connector of the CCU
is output from the PROMPTER/GENLOCK connector of the
camera.

Adjusting the Audio Level

When the HXCU-FB80 is connected
The input levels from audio sources connected to the AUDIO 1 IN
and AUDIO 2 IN connectors can be adjusted using a remote control
Item Setting
SDI OUT SD-SDI
DOWN MAIN
CONVERTER
SELECT
Item Setting
OUTPUT VBS
DOWN MAIN
CONVERTER
SELECT
Item Setting
SDI OUT RET
Item Setting
SDI OUT VF
Item Setting
OUTPUT VF
panel connected to the CCU or the CONFIGURATION menu on the
CCU.
When the audio input selector switch is set to MIC, the level can be
adjusted between 20 dB and 60 dB in steps of 10 dB.
When the audio input selector switch is set to LINE, the level cannot
be adjusted.
In standalone operation mode
The input level from audio sources connected to the AUDIO 1 IN
and AUDIO 2 IN connectors can be adjusted using the INTERCOM
LEVEL knob on the front of the camera.
When the audio input selector switch is set to MIC, the level can be
adjusted between 20 dB and 60 dB in steps of 10 dB.
When the audio input selector switch is set to LINE, the level cannot
be adjusted.
Set the gain to avoid clipping the audio signal by monitoring the
audio level meters and waveforms.
You can assign a function to the INTERCOM LEVEL knob on the
<VR ASSIGN> page in the OPERATION menu.

Setting the Digital Extender Function

The central area of the screen can be magnified by a factor of 2 or 4
by enabling the digital extender function.
To use the digital extender function, assign the function to one of the
ASSIGN 1/2/3 buttons. Press the button to magnify the central area
of the screen by a factor of 2 or 4, and press again to return to the
original image.
1
Select D.EXT ENABLE on the <OTHERS> page in the
MAINTENANCE menu, and set to ENABLE.
2
Assign the digital extender function (D.EXTENDER ×2 or
×4) to a button on the <SWITCH ASSIGN1> page in the
OPERATION menu.
Select one of ASSIGNABLE 1/2/3, and set to D.EXTENDER
×2 (2×) or D.EXTENDER ×4 (4×).
Note
When D.EXT ENABLE is set to ENABLE on the <OTHERS> page in the
MAINTENANCE menu, video output from the camera is delayed by 1 field.
33