Front And Right Side - Sony HXC-FB80 Operating Instructions Manual

Front and Right Side

Note
When connected to a camera control unit or external remote control device
(for example, RCP or RM), the following switch functions are controlled
from the connected device. The switches on the camera do not function.
a FILTER (filter select) knob
Switch between four built-in ND filters. When this switch is
adjusted, the filter setting appears in the viewfinder for about three
seconds.
FILTER knob setting ND filter
1 Clear
2 1/4 ND (attenuates light to approximately 1/4)
3 1/16 ND (attenuates light to approximately 1/16)
4 1/64 ND (attenuates light to approximately 1/64)
b Shoulder strap fitting
For details about attaching, see "Attaching the Shoulder Strap"
(page 26).
• SHUTTER switch
• WHT/BLK switch
• OUTPUT/AUTO KNEE switch
• WHITE BAL switch
• GAIN switch
c ASSIGN (assignable) 1/2/3 buttons
You can assign functions to these buttons using ASSIGNABLE
1/2/3 on the <SWITCH ASSIGN1> page in the OPERATION menu.
No function is assigned by factory default.
d COLOR TEMP. (color temperature) button
Press the button, turning it on, to change the color temperature for
shooting (factory default: 5600K).
You can assign a function to this button using ASSIGN CTEMP on
the <SWITCH ASSIGN1> page in the OPERATION menu.
e SHUTTER switch
Set to the ON position to use the electronic shutter. Set to the SEL
position to switch the shutter speed or shutter mode display. When
this switch is operated, the shutter settings appear in the viewfinder
for about three seconds.
11