Editing The User Menu - Sony Power HADFX HDC-P1 Operation Manual

1
Set the cursor to the position where you wish enter a
character, then push on the menu control knob.
Another cursor appears on the character list.
2
Set the cursor to the character to be entered and push
on the menu control knob.
Repeat steps 1 and 2.
• By selecting INS on the line below the character list, you
can enter a space at the cursor position.
• Selecting DEL deletes the character at the cursor
position.
• You can return to step 1 without changing the character
by selecting RET.
• If you enter the permitted maximum number of
characters (up to the stop mark at the right end of the
line), the cursor moves to ESC on the line below the
character list.
3
Select END and push on the menu control knob.
The new string you have set is registered.
To reset a changed value
Select ESC and push on the menu control knob.
To end menu operations
Set the DISPLAY/MENU switch to OFF.
Restoring a setting to the default setting
When an item is selected and , is displayed, pressing and
holding the menu control knob for 3 seconds restores the
setting value to the state in the reference file. If 10 SECCLEAR
of the FILE CLEAR page on the FILE menu is set to ON,
pressing the control knob for another 10 seconds restores the
reference file value of the selected item to the default state.

Editing the USER Menu

You can select desired pages and items from the
OPERATION, PAINT, MAINTENANCE, FILE, and
DIAGNOSIS menus and register them to the USER menu.
If you specify pages or items frequently used for the USER
menu, you can easily call and use them.
The following pages are included on the factory-set USER
menu:
Menu page title
<VF DETAIL>
<FOCUS ASSIST>
<VF DISPLAY>
<VF MARKER>
<CURSOR>
<ZEBRA>
<LENS FILE>
<OUTPUT FORMAT>
<SDI OUT>
<DOWN CONVERTER> U10
<TALLY>
<ROM VERSION>
18
Menus
USER Source menu/
menu No. page No.
U01 OPERATION
U02 OPERATION
U03 OPERATION
U04 OPERATION
U05 OPERATION
U06 OPERATION
U07 OPERATION
U08 MAINTENANCE
U09 MAINTENANCE
MAINTENANCE
U11 MAINTENANCE
U12 DIAGNOSIS
For the items on each page, see "OPERATION Menu" (page
20), "MAINTENANCE Menu" (page 24), or "DIAGNOSIS
Menu" (page 28).
The USER MENU CUSTOMIZE menu allows you to configure
the USER menu as follows:
• Creating a new menu page and selecting and adding
(registering) items that you use very frequengly from
multiple menu pages.
• Deleting (unregistering) added items.
• Changing the order of added items.
• Adding (registering) a menu page (new page you create or
existing menu page) to the USER menu.
• Deleting (unregistering) a page from the USER menu.
• Changing the order of pages of the USER menu.
Editing at the item level
The USER MENU CUSTOMIZE menu allows you to create a
new page for the USER menu and add any item.
Initially, the EDIT page of the USER MENU CUSTOMIZE
already contains items but the USER 1 EDIT to USER 19 EDIT
pages are blank. Up to 10 items can be selected and
registered to these pages from different menu pages.
To add items to a page
1
Select USER MENU CUSTOMIZE on the TOP MENU
screen (see page 16).
If this is the first time the USER MENU CUSTOMIZE
menu has been displayed, the CONTENTS page of the
menu appears.
xx
c
If the USER MENU CUSTOMIZE menu has been used
before, the page last accessed appears.
2
If the CONTENTS page is displayed, turn the menu
control knob to move the pointer to any of USER 1
EDIT to USER 19 EDIT then push on the menu control
knob to display the page.
If a different page is displayed, turn the menu control
03
knob until the desired page appears then push on the
menu control knob to select the page.
04
Example: When you select the USER 2 EDIT page
01
02
c
06
05
08
M07
M10
M08
M06
D03
CONTENTS E00 TOP
01.EDIT PAGE
02.USER 1 EDIT
03.USER 2 EDIT
04.USER 3 EDIT
05.USER 4 EDIT
06.USER 5 EDIT
07.USER 6 EDIT
08.USER 7 EDIT
09.USER 8 EDIT
10.USER 9 EDIT
USER 2 EDIT E03 TOP