Attaching And Adjusting The Viewfinder - Sony HXC-FB80 Operating Instructions Manual

To attach the rear cover
Align the guide on the inner side of the rear cover with the camera
adaptor mount, and insert the cover.

Attaching and Adjusting the Viewfinder

Warning
When the viewfinder is attached, do not leave the camera with the
eyepiece facing the sun.
Direct sunlight can enter through the eyepiece, be focused in the
camera and cause a fire.
This section describes how to attach and adjust the HDVF-L10
viewfinder supplied with the HXC-FB80K. For details about
attaching and adjusting the viewfinder supplied with the HXC-
FB80S, refer to the operation manual for the HDVF-L750.
Attaching the viewfinder
Attach the HDVF-L10 viewfinder supplied with the HXC-FB80K.
Notes
• Be sure to power off the camera before plugging the viewfinder connector
into the VF connector of the camera. If the connector is plugged in while
the power is on, the viewfinder may not operate correctly.
• Plug the viewfinder connector all the way into the VF connector of the
camera. If the connector is not firmly connected, the image may become
distorted or the tally indicator may not operate properly.
1
Rear cover
2
To detach the viewfinder
Detach in the reverse procedure of attaching. When detaching the
viewfinder from the shoe, lift up the slide stopper on the viewfinder.
18
1 Loosen the viewfinder left-to-right positioning ring, 2
attach the viewfinder to the viewfinder shoe, and 3 tighten
the viewfinder left-to-right positioning ring.
Slide stopper
2
1
Connect the viewfinder connector to the VF connector.
VF connector
3