Sony HXC-FB80 Operating Instructions Manual page 19

Adjusting the position
To adjust the viewfinder left-to-right position, loosen the left-to-
right positioning ring. To adjust the front-to-back position, loosen
the front-to-back positioning lever and lock knob.
Viewfinder left-to-right positioning ring
Viewfinder front-to-back positioning lever
and lock knob
Adjusting the angle
You can adjust the angle of the viewfinder.
To reverse the display (image/text indication)
vertically
The viewfinder can be rotated as much as 180 degrees so that it is
facing the subject.
In this case, the image and other information displayed appear
upside down on the screen.
To restore the normal display, set the MIRROR switch on the
viewfinder to the B/T position to flip the display vertically.
Raising the viewfinder barrel or eyepiece
You can view the LCD screen inside the viewfinder or its mirrored
image by raising the viewfinder barrel or eyepiece.
This section describes how to raise and detach the viewfinder barrel.
The eyepiece can also be raised and detached in the same way.
To raise the viewfinder barrel
1 Push the clip on the bottom to release it, and 2 flip up the
viewfinder barrel.
It locks at the 120-degree position.
LCD screen
Keep in the lock position for normal use.
You can also open it farther from the lock position. To set to the 120-
degree position again, return it to the closed position and then open
it again.
19