Sony HXC-FB80 Operating Instructions Manual page 50

OPERATION
Page name Item
Page No.
<SWITCH ASSIGN1> GAIN
09 (U09)
ASSIGNABLE1
ASSIGNABLE2
ASSIGNABLE3
ASSIGN CTEMP
RE.ROTATION
<SWITCH ASSIGN2> LENS VTR S/S
10 (U10)
FRONT RET
REAR ENC SW
Setting
L: –6dB, –3dB, 0dB, 3dB, 6dB,
9dB, 12dB
M: –6dB, –3dB, 0dB, 3dB, 6dB,
9dB, 12dB
H: –6dB, –3dB, 0dB, 3dB, 6dB,
9dB, 12dB
OFF, RETURN1 SW, RETURN2
SW, RETURN3 SW, RETURN4
a) b) b)
SW, INCOM , ENG , PROD
VF DETAIL, VF COLOR
DETAIL, MARKER, CURSOR,
ZEBRA, MIX VF, ND FILTER,
ELETRICAL CC, 5600K, ATW,
FAN MAX, D.EXTENDER×2,
D.EXTENDER×4,
D.EXTENDER, FOCUS ASSIST
INDICATOR, TLCS, PinP, VF
ASSIGN SW1, VF ASSIGN SW2,
RET1 SW TOGGLE, RET2 SW
TOGGLE, RET3 SW TOGGLE,
RET4 SW TOGGLE, CURSOR
ALL OFF
OFF, RETURN1 SW, RETURN2
SW, RETURN3 SW, RETURN4
a) b) b)
SW, INCOM , ENG , PROD
VF DETAIL, VF COLOR
DETAIL, MARKER, CURSOR,
ZEBRA, MIX VF, ND FILTER,
ELETRICAL CC, 5600K, ATW,
FAN MAX, D.EXTENDER×2,
D.EXTENDER×4,
D.EXTENDER, FOCUS ASSIST
INDICATOR, TLCS, PinP, VF
ASSIGN SW1, VF ASSIGN SW2,
RET1 SW TOGGLE, RET2 SW
TOGGLE, RET3 SW TOGGLE,
RET4 SW TOGGLE, CURSOR
ALL OFF
STD, RVS
OFF, VTR S/S, RETURN1 SW,
RETURN2 SW, RETURN3 SW,
a)
RETURN4 SW, INCOM , ENG
b) b)
, PROD , VF ASSIGN SW1,
VF ASSIGN SW2
OFF, VTR S/S, RETURN1 SW,
RETURN2 SW, RETURN3 SW,
a)
RETURN4 SW, INCOM , ENG
b) b)
, PROD , D.EXTENDER×2,
D.EXTENDER×4, D.EXTENDER
a) b) b)
OFF, INCOM , ENG , PROD
50
Description / Remarks
Assigns functions to the ASSIGN 1 button, ASSIGN 2 button,
and ASSIGN 3 button, respectively.
,
a) When PANEL TYPE is set to UCJ
b) When PANEL TYPE is set to CE
Assigns a function to the COLOR TEMP. button.
a) When PANEL TYPE is set to UCJ
,
b) When PANEL TYPE is set to CE
Operation mode of the menu control knob
STD: Rotating clockwise moves the , cursor down or
increases value.
RVS: Rotating counterclockwise moves the , cursor down or
increases value.
Assigns a function to the VTR button on the lens.
a) When PANEL TYPE is set to UCJ
b) When PANEL TYPE is set to CE
Assigns a function to the RET button at the front.
a) When PANEL TYPE is set to UCJ
b) When PANEL TYPE is set to CE
Assigns the function to turn the intercom microphone ON to the
assignable button on the rear.
ENG: Output on the ENG line.
PROD: Output on the PROD line.
INCOM: Output on the line selected using the INTERCOM
MIC switch.
a) When PANEL TYPE is set to UCJ
b) When PANEL TYPE is set to CE