Overview; Camera System Components - Sony HXC-FB80 Operating Instructions Manual

Overview

The HXC-FB80 HD Color Camera employs a 2/3-inch type "Exmor" CMOS image sensor that achieves a high sensitivity of F12 (1080/
59.94i)/F13 (1080/50i) and high S/N ratio of 60 dB. Full HD progressive is also supported at 59.94/50P frame rates.
You can use this unit as a studio camera by connecting it to an HXCU-FB80 or HXCU-FB70 Camera Control Unit (CCU) using a fiber cable.
4K (3840×2160) upscaled signal output or HD-HDR signal (HLG) output from the HXCU-FB80 is supported when used in conjunction with
the HXCU-FB80.
Note
The version of the unit and the HXCU-FB80 to connect to the unit must both be upgraded to version 1.10 or later for HD-HDR signal support. For details, contact
a Sony sales or service representative.

Camera System Components

The HXC-FB80 camera system comprises the components shown in the figure below.
The operation of the camera head is the same for all models.
HXC-FB80 camera head
Microphone
HXC-FB80H
Test chart for flange
focal length
adjustment
HDVF-L10
Viewfinder
HXC-FB80K
3
Cable clamp belt
Lens
HXC-FB80S
HDVF-L750
Viewfinder
Indoor hood
V-wedge shoe
attachment