Adaptation To Different Kinds Of Gas - Electrolux EKM 60350 Instruction Booklet

Adaptation to different kinds of gas

To adapt the appliance to a different
kind of gas from the one the appliance
has been set for, follow the instructions
below in their order.
Gas connection
LPG: use the rubber pipe holder «D».
Natural gas : use the pipe holder «E».
Always insert the gasket sealing «B».
Then proceed with the gas connection, as
indicated in the relevant paragraphs.
Hob burners nozzles
1. Nozzles replacement
1. Remove the pan supports.
2. Extract the caps and the wall baffles
of the burners.
3. Using a socket spanner 7 unscrew
and remove (see diagram) the noz-
zles replacing them with the ones re-
quired for the kind of gas in use (see
table "Burner characteristics").
4. Reassemble the parts following the
same procedure backwards.
5. Replace the rating label (placed near
the gas supply pipe) with the relevant
one for the new type of gas supply.
You can find this label in the package
of the injectors supplied with the ap-
pliance.
These burners do not need any
primary air regulation.
D
A A A A A Gas connection point
B B B B B Gasket
C C C C C Adjustable connection
D D D D D LPG rubber pipe holder
E E E E E Natural gas pipe holder
electrolux 35
A
C
E
B