Electrolux EKM 60350 Instruction Booklet page 36

Mixed-fuel cooker
Hide thumbs Also See for EKM 60350:
Table of Contents

Advertisement

Available languages

Available languages

36 electrolux
2. Adjustment of minimum level
To adjust the minimum level of the
burners, proceed as follows:
1.
light the burner;
2.
turn the knob on the position of mini-
mum flame;
3.
remove the knob;
4.
with a thin screwdriver, adjust the
by-pass screw (see diagram).
If changing from natural gas 20
• • • • •
mbar/13 mbar to liquid gas,
completely tighten the adjustment
screw in, until a small regular flame
is obtained.
If changing from liquid gas to
• • • • •
natural gas 20 mbar, undo the by-
pass screw about 1/4 of a turn, un-
til a small regular flame is obtained.
If changing from natural gas 20
• • • • •
mbar to natural gas 13 mbar
undo the by-pass screw about 1/4
of a turn, until a small regular flame
is obtained.
If changing from liquid gas to na-
• • • • •
tural gas 13 mbar, undo the by-
pass screw about 3/4 of a turn, un-
til a small regular flame is obtained.
Reassemble the parts following the
same procedure backwards.
Finally, check the flame does not go
out when quickly turning the knob from
the maximum position to the minimum
position.
by-pass screw

Advertisement

Table of Contents
loading

Table of Contents