Electrolux EKM 60350 Instruction Booklet page 32

32 electrolux
Installation
This appliance cannot be po-
sitioned on a base.
The following instructions are meant
for a qualified installer, in order that the
operations of installation, regulation, and
service are executed according to the
existing regulations.
Whenever changes are mode involving
the disconnection of the appliance it is nec-
essary to proceed with maximum caution.
THE MANUFACTURING COM-
PANY
RESPONSABILITY FOR POS-
SIBLE DAMAGES RESULTING
FROM AN INSTALLATION
WHICH DOES NOT COMPLY
WITH THE RULES IN FORCE.
Positioning
This appliance has been designed to
be placed close to furniture units not ex-
ceeding the height of the working level.
The distance between the hob and
the side wall/furniture (if present) should
be minimum 450 mm.
Feet Assembly
Before installing the cooker, it is
necessary to assemble the supplied feet.
1. Remove the hob pan supports, the
burner caps and crowns and the
oven accessories.
2. Carefully lean the cooker on its back,
paying attention not to cause any
damage.
3. Adjust the feet height by unscrewing
the bottom part of each foot, until
you obtain the required height (height
can be adjusted from 850 to 880
mm).
4. Insert the feet into the relevant holes
DECLINES
indicated in the diagram.
5. Lift the cooker in vertical position.
Replace the crowns, the burner caps,
the hob pan supports and the oven
accessories.
6. If necessary, adjust the cooker
horizontal levelling by turning the
bottom part of the feet, until the
appliance is completely stable. (see
diagram).
ANY