Gas Connection - Electrolux EKM 60350 Instruction Booklet

Gas connection

Gas connection must be carried out
according to the rules in force. The
manufacturing company release the unit,
once tested, adjusted for the kind of gas
stated on the rating plate located on the
back of the range, next to connection
pipe. Be sure that you are going to
connect the unit to the same kind of gas
written on the plate.
Installation environnement
Warning - This unit can be installed
and can work only in constantly ventilated
rooms, according to rules in force.
In order to make the gas unit work
properly, it is necessary that air sufficient
to gas combustion can naturally flow in
the room. (The installer must follow the
rules in force).
The air flow into the room must come
directly through openings of external
walls. These openings (or opening) should
be realized in such a way not to be
occluded both from inside and outside.
Installation and maintenance must be
carried out by a qualified technician, in
compliance with rules in force.
The electric connection must be
carried out in compliance rules in force.
Our responsability will not be
involved in case of accidents caused
by a defective or non existent earth
connection.
Combustion products discharge
Gas cooking units must discharge
combustion products through hoods
directly connected to flues or outside.
Connection using a rigid pipe
or a flexible metal pipe
To ensure higher safety, it is
recommended to carry out the
electrolux 33
Flexible
rubber gas
pipeline
Electric
wire
Flexible
rubber gas
pipeline
YES
NO
Electric
wire