Proxim AP-4900MR-LR Quick Install Manual page 14

3. To connect the unit through a hub or a switch to a PC, use a straight-
through Ethernet cable between the network interface card in the PC and
the hub, and between the hub and the RJ45 "Data In" port on the PoE
adapter.
Note:
On FC units, connect the cable between the hub and the RJ45 "J2 PC/
Router" port on the power injector (not pictured).
If you are connecting the PC directly to the unit, use a crossover Ethernet
cable between the network interface card in the PC and the RJ45 "Data In"
port on the power injector.
Note:
On FC units, connect the cross-over cable between the network interface
card in the PC and the and the RJ45 "J2 PC/Router" port on the power
injector (not pictured).
Page 14 Copyright © 2006 Proxim Wireless