Step 7: Complete Installation - Proxim AP-4900MR-LR Quick Install Manual

step 7: complete Installation

1. Tighten the sealing nut (Torque 3 N∙m/25 in-lbs) and lock nut (Torque
4 N∙m/35 in-lbs).
CAUTION!.
Do.not.over-tighten!.Over-tightening.can.cause.the.CAT5.cable.to.
become.pinched.and.can.subsequently.damage.the.power.injector.
or.the.unit...
2. Tighten the RJ45 sealing cap.
CAUTION!
Be.sure.you.have.re-installed.the.waterproof.caps.on.the.serial.and.
Ethernet.port.connections...It.is.also.good.installation.practice.to.
use Butyl weatherproofing tape to seal the caps, as this adds an
extra.layer.of.protection.
Page 1 Copyright © 2006 Proxim Wireless