Installing The Software - Proxim AP-4900MR-LR Quick Install Manual

configuration screen. Note that clicking a link in the navigation panel
will not submit any changes you made to the unit's configuration on the
current page.
▪ Exit: To exit from the Setup Wizard at any time, click Step 1:
Introduction on the navigation panel, and then click the Exit button.
CAUTION:
If.you.exit.from.the.Setup.Wizard,.any.changes.you.submitted.(by.
clicking.the.Save.&.Next.button).up.to.that.point.will.be.saved.to.the.
unit.but.will.not.take.effect.until.it.is.rebooted.
2. Follow the prompts provided by the Setup Wizard to perform an initial
configuration of the AP. See the AP-4900MR-LR User Guide for more detailed
Setup Wizard instructions and for Advanced Configuration instructions.

Installing the software

Proxim periodically releases updated software for the AP-4900MR-LR on its
support Web site, http://support.proxim.com. Proxim recommends that you
check the Web site for the latest updates after you have installed and initialized
the unit.
Download the Software
1. In your web browser, go to http://support.proxim.com.
2. If prompted, create an account to gain access.
Note:
The Knowledgebase is available to all Web site visitors. First-time users will
be asked to create an account to gain access.
3. Click.Search.Knowledgebase.
4. In the Search.Knowledgebase field, enter 2334.
5. From the Search.By drop-down menu, select Answer.ID.
6. Click Search.
7. Click on the appropriate link in the Summary column to download the
software.
8. Click on the appropriate link to download the software.
Install the Software
1. Enter the Access Point's IP address in the browser's Address field and press
Enter or Go.
Page 24 Copyright © 2006 Proxim Wireless