step 1: choose a location
To make optimal use of the unit, you must find a suitable location for the
hardware. The range of the radio unit largely depends upon the position of the
antenna. Proxim recommends you do a site survey, observing the following
requirements, before mounting the hardware.
▪
The location must allow easy disconnection of power to the radio if
necessary.
▪
Air must be able to flow freely around the hardware.
▪
The radio unit must be kept away from vibration and excessive heat.
▪
The installation must conform to local regulations at all times.
The units are designed to directly mount to a pole or wall. Using the supplied
brackets and hardware, you can mount them to a 1.25 inch to 4.5-inch pole
(outside diameter). Using just one of the mounting brackets, you can mount
the units to a wall or other flat surface.
Caution!
Proxim.recommends.the.use.of.a.lightning.arrestor.at.the.building.
ingress.point...You.can.purchase.the.Proxim.Lightning.Protector;.see.
the.documentation.that.comes.with.the.unit.for.more.information.
and.installation.instructions.
All rights reserved
Page 9