Fig.49
Fig.50
Riser rail
Retaining
screw
T300si wireless remote electric shower
Spacer
Bottom
bracket
Fig.51
400mm
approx
250mm
approx
Slide the hose retainer onto the lower rail section.
Fit the showerhead holder onto the riser rail
section, press and hold the button on top of the
holder to release the locking mechanism, then
slide onto the rail (Fig.49). Release the button to
lock the holder in place.
Refit the lower riser rail assembly into the base
of the bridging bracket, again making sure the
small cut-out engages the bracket lug. Secure
the rail and bottom bracket assembly to the wall
using the screw supplied (Fig.50).
30