Display Hierarchy And Menu Mode; Standard Mode; User-Difined Mode - Veikong VFD500 Series Operation Manual

VFD500 high performance vector control frequency inverter user manual
9 Indicator light:Hz
10 Indicator light:A
11 Indicator light:V
12 Running lights
13 Direction indicator
Command source
14
indicator
15 Fault indicator

4.2 Display hierarchy and menu mode

VFD500 digital keyboard display is divided into four layers, from top to bottom are: monitoring status, menu
mode selection status, function code selection status, parameter editing / viewing status, as shown in Figure 4-2. In
the menu mode selection status, press 【UP】 or 【DOWN】 key to select menu mode, press 【ENTER】 to enter
the selected menu mode, the following describes several menu modes:
MONITO
R
STATUS
Monitoring volume1
ESC
MENU
CHOOSE
STATE

Standard mode

ESC
COMMAND
CODE
【UP、DOWN、SHIFT】
ESC
PARAMETER
EDIT/VIEW
STATUS
【UP、DOWN、SHIFT】
 Standard mode（-bSC-）
If access (P00.01) is standard, all the function codes mentioned in this manual are accessible.
If access (P00.01) is the end user (in the state of user password lock), then only some function code can be
accessed.
 User-difined mode（-USr-）
In this menu mode, only 20 user-defined parameters defined are displayed.
· Indicate the digital display unit, all three lights off menas other
units
• Off: indicates a stop condition.
• On: indicates inverter is running.·
Blinking: Deceleration stopped.
• Used to indicate the sign of the variable when the LED is
displaying one of the variables listed in 27.02;
• In other cases the sign of the output frequency is indicated.
• Off: The command source is the keyboard.
• On: The command source is terminal.
• Blinking: The command source is communication.
• When it is on, the drive is faulty.
SHIF
T
Monitoring volume2
UP
DOWN

User-difined mode

ENTER ESC ENTER
【UP、DOWN】
ENTER ESC ENTER
【UP、DOWN、SHIFT】
4-2Keyboard operation diagram
- 24 -
Chapter 4 Operation and display
SHIF
SHIF
T
T
Monitoring volume3
UP
UP
DOWN
DOWN
Check mode
ESC ENTER
【UP、DOWN】
ESC ENTER
【UP、DOWN、SHIFT】
SHIF
Monitoring
T
volume1
Monitoring volume4
UP
"-bSC-
"
DOWN
Wizard mode
ESC ENTER
【UP、DOWN】
ESC ENTER
【UP、DOWN、SHIFT】