Veikong VFD500 Series Operation Manual page 34

Chapter 5 Function code table
Functio Parameter name
n code
P01.08 Upper limit frequency
P01.09 Lower limit frequency
Action when set
P01.10 frequency lower than
lower limit frequency
Delay time when set
P01.11 frequency lower than
lower limit frequency
Jump frequency start up
P01.12
protection
Jump frequency 1 lower
P01.13
limit
Jump frequency upper
P01.14
limit
Jump frequency 2 lower
P01.15
limit
Jump frequency 2 upper
P01.16
limit
Jump frequency 3 lower
P01.17
limit
Jump frequency 3 upper
P01.18
limit
Risk speed or Jump frequency start up protection is used to some situation which need avoid motor speed and
speed range,for example,due to mechanical resonance ,P01.12 will be enabled to avoide risk speed in forward or
reverse mode
。
Motor frequency
P01.18
P01.17
P01.16
P01.15
P01.14
P01.13
Multiple speed reference
P01.19
source
VFD500 high performance vector control frequency inverter user manual
Lower limit frequency(P01.09)～maximum
frequency (P01.06)
0.00Hz～upper limit frequency
0：Run at low limit frequency
1：Stop after delaying P01.11
2：Run at zero speed
0.000s～30.000s
Unit/ten/hundred'digit：three jump frequency
1/2/3
0：Disable
1：Enable (avoid risk speed)
0.00Hz～(P01.14)
P01.13- (P01.06)Maximum frequency
0.00Hz～(P01.16)
P01.15～maximum frequency(P01.06)
0.00Hz～(P01.18)
P01.17～maximum frequency(P01.06)
Giving frequency
Unit'digit：0 phase reference source
set by
0-multiple speed(P01.21)
1-preset frequency (P00.07)
2:AI1
- 31-
Description Default Property
☆
50.00Hz
☆
0.00Hz
★
0
★
0.000s
☆
000
☆
0.00Hz
☆
0.00Hz
☆
0.00Hz
☆
0.00Hz
☆
0.00Hz
☆
0.00Hz
★
00