Chapter 4 Operation and display
Chapter 4 Operation and display
4.1 LED Instruction of operation and display
LED keyboard consists of 5 digital tubes, 7 lights, 8 keys and a potentiometer; can be used to set
the parameters, status monitoring and operation control, LED keyboard shape as shown in Figure 4-1:
Description of indicator
No.
Part
1
Exit
2
Confirmation
3
Increment
4
Decrement
Multi-function
5
6
Shift
7
Run
8
Stop/Reset
VFD500 high performance vector control frequency inverter user manual
Figure 4-1 Operating panel
Table 4-1 The name and function of each part of the keyboard
Name
•
exit menu level
•
Enter the menu interfaces level by level,
•
confirm the parameter setting and save to EEPROM
• The number indicated by the cursor increases by one.
• Next function code.
• Used to switch the left and right screens while in monitor mode
· The number indicated by the cursor minus one.
• The previous function code.
·
Perform function switchover according to the setting of
21.02
• Cursor shift.
• Monitor Status Displays the next monitor volume.
• Switch left and right screens.
Start the frequency inverter in the operation panel control
mode
• During operation, press to stop the operation (restricted by
parameter 21.03).
• In fault status, press this key to reset the fault.
Function
- 23-