Download Print this page

Ford Bronco 1968 Installation Manual page 8

Advertisement

PAGE
8
Disconnect the battery ground cable.
Drain radiator and disconnect Heater hoses from the heater connections on engine
side of the firewall.
Remove Glove box door, and glove box. Retain the glove box door and all original
hardware.
Discard the glove box housing.
Located behind glove box are the defrost duct hoses. Remove the entire hose and
discard.
Disconnect Heat/defrost control cable from the heater. Discard the hardware.
Located on the firewall in the engine compartment (4) Hex head nut and washers.
Remove and discard.
www.classicautoair.com • 866.435.7801

Advertisement

loading

This manual is also suitable for:

Bronco 1969Bronco 1967