Advertisement
PAGE
21
The engine compartment components should be installed at this time. Carefully
follow the electrical diagram provided on page 8.
COMPRESSOR MOUNTING COMPONENTS WILL DIFFER DEPENDING ON
ENGINE AND DRIVE ACCESSORIES THAT YOUR VEHICLE IS EQUIPPED WITH.
THE FOLLOWING INSTRUCTIONS SHOW THE PROPER INSTALLATION
SEQUENCE FOR THIS VEHICLE
Locate the following components from the under hood components box:
Condenser
Discharge Tube
Liquid Tube
(4) Condenser mounting brackets
(8) #10 x 3/8 hex washer head screws
Remove Radiator Fan, Shroud and the Radiator. Retain the original mounting
hardware.
Locate the drivers side radiator support Template from last few pages of the instal-
lation instructions.
Locate template on the radiator support and drill (1) hole 7/8" diameter.
Locate the passengers side radiator support Template from last few pages of the
installation instructions.
Locate template on the radiator support and drill (1) hole 3/4" diameter.
www.classicautoair.com • 866.435.7801
Advertisement
