Advertisement
PAGE
19
Locate the refrigerant insulation tape from the hardware sack kit.
Wrap metal connection using the tape. There should be no exposed metal surfaces.
Locate the clear ½" drain tube from the hardware sack kit.
Attach over drain nipple on bottom of the unit and insert other end through the hole previ-
ously drilled.
Reinstall the radio.
Locate the center dual louver assembly, (2)
#10 x ¾" tek screws, and (2) #8 x 3/8" pan head screws.
Attach hose adapter to bottom of the dash using #10 screws. Be sure to center the louvers
under the radio.
Attach front louver assembly to the hose adaptor using the #8 screws.
Locate 2"flex hose from the unit box.
Cut (1) piece 18" long and (1) piece 20" long.
Attach 20" piece to driver's side louver and 18" piece to the passenger side.
www.classicautoair.com • 866.435.7801
Advertisement
