Advertisement
PAGE
20
Locate the single under dash louver assembly, and (2) #10 x ¾" tek screws.
Attach the housing to drivers side under the dash using #10 screws.
Insert louver into the housing.
Locate 2" x 36" and 2" x 24" (2) flex duct. Cut one piece at 32", one at 20" and
one at 18".
Attach 32" hose to the driver's louver and route across to left outlet on the unit.
32"
18"
2 0"
Route 18" flex hose from center louver to next left outlet on the evaporator
The 20" flex duct goes to next outlet on the evaporator.
Locate the single under dash louver and (2) #10 x ¾" tek screws.
Attach housing to driver's side under the dash using the #10 screws.
Insert the louver into the housing.
Locate last of 2" x 24" flex hose and cut 23" piece. Attach flex hose to hose
adapter on back of the louver. Route hose up and behind glove box opening.
Attach to last remaining outlet on the main unit.
www.classicautoair.com • 866.435.7801
Advertisement
