Advertisement
PAGE
12
Locate the #1 template from last few pages of the installation instructions.
Attach to the dog house and drill (2) holes 5/16" dia. as shown.
Locate the #2 template.
Attach over the (2) original heater mounting holes. Drill (2) 1 ½" holes and (1)
11/16" hole as shown.
The modifications to the vehicle are complete. You can now begin installing your
new Classic Auto Air "Perfect Fit Series" system.
Locate the Evaporator Assembly. Place on work bench.
Remove drivers side heat dump and discard the dump and the hardware.
HEAT
DUMP
www.classicautoair.com • 866.435.7801
Advertisement
