General Description - Dataprobe iBoot-PoE General Description Manual

The iBoot-PoE is a network attached, IP addressed, web controlled Power Over Ethernet (PoE) power
switch. Anyone with a web browser can access iBoot-PoE to perform power On, Off or Power Cycle
(Reboot). iBoot-PoE uses two levels of password for security.
iBoot-PoE has a web server built in, as well as the ability to be managed through the iBoot Cloud Service.
A simple Web browser interface makes it easy to control power from anywhere in the world with a click of a
mouse. iBoot-PoE also supports Telnet for text commands, as well as Dataprobe's Exchange Protocol
(DxP) for interfacing to a variety of Dataprobe products and custom software development.
1.1. Uses for iBoot
•
Automatic reboot of PoE devices – Cameras, Access Points, Phones, etc.
•
Range Extender – Add 100 meters to PoE runs
•
PoE Injector – When used with Power Supply PS-WRI-7 iBoot-PoE is a complete PoE injector with
reboot. The external power supply can also function as back-up power in the event that the PoE
power fails.
iboot-poe_v180808n

1. General Description

iBoot-PoE Page 2