General Description - Dataprobe iBoot-WiFi Manual

Wifi enabled
Table of Contents

Advertisement

The iBoot-WiFi is a wireless, IP addressed, web controlled AC power switch. Anyone with a web browser can access
iBoot-WiFi to perform power On, Off or Power Cycle (Reboot or Power Burst). iBoot-WiFi uses two levels of password for
security.
A simple Web browser interface makes it easy to control power from anywhere in the world with a click of a mouse. You can
access the iBoot-WiFi directly from your browser or through the iBoot Cloud Service.
text commands, as well as Dataprobe's Exchange Protocol (DxP) for interfacing to a variety of Dataprobe products and
custom software development.
3.1. Uses for iBoot
Remote reboot of any device, routers, servers, kiosks, etc. The device to be rebooted need not be network attached.
Secure sensitive devices by keeping them powered off when not in use. This prevents hackers from seeing them at
all times.
Power down equipment when not needed for power savings and to save on wear and tear.
Power up alert devices like sirens, lamps, signage; or control environmental system like heaters, coolers pumps, etc.
3.2. Multiple Control Options
In addition to the Web control capabilities, iBoot-WiFi features several other means to operate automatically or under
computer control.
AutoPing: The AutoPing feature allows iBoot-WiFi to automatically detect failed equipment and perform a timed reboot or
other power control function (like turning on an indicator or siren). You set 1 or 2 IP addresses to be periodically pinged.
When iBoot-WiFi no longer detects a response from the address(es), the programmed power control function is
actuated.
Telnet: iBoot-WiFi's Command Line Interface (CLI) allows direct control and setup through Telnet.
Dataprobe Exchange Protocol: iBoot-WiFi supports the Dataprobe Exchange Protocol (DxP) This protocol allows
Dataprobe products to communicate across networks, and allows developers to design custom applications to integrate
iBoot-WiFi into custom applications. For more information about DxP, contact Dataprobe Applications Engineering and
Support.
Pre-Compliance v180808n

3. General Description

Remote User
Local WiFi
Network
Internet
Cloud Service
WiFi Router
Power
Controlled
Device
Cloud User
Figure 1 iBoot Application Diagram
iBoot-WiFi
iBoot-WiFi also supports Telnet for
Local WiFi User or
Nework User
W i F i
Page 3

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the iBoot-WiFi and is the answer not in the manual?

Questions and answers

Table of Contents