Dataprobe iBoot-PoE General Description Manual page 26

set event <1-8> date <mm/dd/yyyy>
set event <1-8> time <hh:mm>
set event <1-8> action <on | off | cycle>
set event <1-8> repeat <day | hour | minute>
set event <1-8> mult <0-999>
del event <1-8>
Prompts
User>
Password>
iBoot >
iBoot Reboot Required>
iboot-poe_v180808n
This command is used to set the scheduled action's start date.
This command is used to set the time the scheduled action will occur in 24 hour
format.
This command is used to set the scheduled action.
This command is used to set how often the scheduled action will repeat.
This command sets how often the event will repeat, the number of increments (as
set by the command above) before the next event.
This command deletes the specified event
The CLI will use the following prompts:
This prompts the user to enter his user name (user or admin). This is the first
prompt that the user is presented with.
This prompts the user to enter his password.
This is the prompt that will be displayed after the user has successfully logged in.
This is the prompt that will be displayed whenever there have been changes made
that require a reboot. This prompt will remain the active prompt until the iBoot-PoE
has been rebooted.
iBoot-PoE Page 26