Dataprobe iBoot-PoE General Description Manual page 17

Date: Set the initial date for the event. The format for the date is mm/dd/yyyy.
Time: Set the initial time for the event. The format for the time is hh:mm with hours in 24 hour format.
Repeat: Set the repeat multiplier, if desired. Set the number from 0 to 999 and either Days, Hours, or
Minutes. To have the schedule repeat every two days, set this number to 2.
Action: Set the event Action; On, Off or Cycle.
Hold/Run: Click Hold to pause the scheduled event. Click Run to re-start the scheduled event.
Clear: Delete the scheduled event.
Click Save to save the current settings. Click Reset to delete any unwanted changes.
5.7. Password Settings
The iBoot-PoE supports three modes of user and
password operation.
Login Required:
and Admin users.
password.
Auto Login: This mode does not require a
username of password for the User level operation.
No login challenge will be required for any mode of operation, until any setup function is requested. The
Admin username and password is required for any admin functions.
User Disabled: There is no User account. The Admin username and password will be required for
operation and setup functions across all modes of operation. This is the factory default mode.
Two passwords are used by iBoot. In the Login Required mode, The User Password allows access to the
control of iBoot, but not to the Setup functions. Clicking on the Setup button allows the Administrator to log
in. Passwords can be up to 20 characters long and are case sensitive.
Enter the current password then the new password twice to confirm.
Default Credentials
Role
Administrator
User
iboot-poe_v180808n
This mode supports both User
Each user has a settable
Username (fixed)
admin
user
iBoot-PoE
Password (user set)
admin
user
Page 17