Accessing The Channel Setup; Figure 2-7 Vertical Scale Area On The Graphical Interface - Keysight Technologies 8990B User Manual

Accessing the Channel Setup

The Channel Setup dialog allows you to configure the settings for each channel.
For RF input channels, you can turn on or off the channel, and set the power
display type, vertical scale, frequency, reference style, reference level, external
loss, bandwidth, and perform zeroing and calibration of the sensor from the
Channel Setup dialog.
For video input channels, you can turn on or off the channel, and set the vertical
scale and offset, input coupling, input impedance, and probe attenuation ratio.
You can select the channel number button at the top of the Channel Setup dialog
to access the setup for the desired channel.
Use the following procedure to access the channel setup.
1 Select the vertical scale area for the desired channel on the graphical interface
Figure 2-7
Keysight 8990B User's Guide
as shown in Figure 2-7.
Vertical scale area on the graphical interface
Using the 8990B 2
51