Accessing the Trigger Setup
The trigger source can be set to channel 1, 2, 3, or 4, or AUX. For the channel
trigger source, you can set the trigger sweep, slope, level, and holdoff. For the
AUX trigger source, the trigger level setting is disabled. The 8990B allows you to
configure the trigger settings from the Trigger section on the front panel and the
Trigger menu on the graphical interface.
Use the following procedures to access the trigger setup.
Front panel
1 To configure the trigger settings, use the individual buttons and knob in
Figure 2-40
2 For more information on the Trigger Setup dialog, refer to
Keysight 8990B User's Guide
the Trigger section, or press
shown in
Figure
2-40.
Menu button in the Trigger section
to access the Trigger Setup dialog as
Using the 8990B
Graphical
interface.
2
75