Figure 2-49 Waveform Memory Dialog; Figure 2-50 Load From Waveform Selection - Keysight Technologies 8990B User Manual

2 Using the 8990B
2 The Waveform Memory dialog is displayed as shown in
Figure 2-49
3 Select the On check box to enable the waveform memory. You can set the
4 Select Load From Waveform to load the waveform from channel 1 to 4 or
Figure 2-50
5 Select Load From File to load the waveform from a CSV file.
6 The Load Waveform dialog is displayed as shown in
84
Waveform Memory dialog
vertical scale and offset. Select the m1, m2, m3, or m4 tab to toggle among
the four available waveform memories.
waveform memory as shown in
only available if the waveform memory is enabled.
Load from waveform selection
select the waveform memory for the waveform data file to load into by
selecting the Load to memory to display the waveform memory list.
Figure 2-50. The waveform memory selection is
Keysight 8990B User's Guide
Figure 2-49.
Figure 2-51. You can