Swegon GOLD RX Series Instructions For Installation Manual page 14

Mount the cover panel and
the sealing plates (2 pcs.).
2 x 2
14 www.swegon.com
Upper casing section
Fix the upper casing section to the lower casing
section with the bolts supplied, screwing them
into the pre-fitted rivet nuts (a total of 16 pcs.).
See also Section 1.7.3 Common for Alternatives 1 and 2
GB. GOLDINE120.130915
Remove the cover panel on the rear
side. Remove the sealing plates (2 pcs.).
Lift the upper casing sec-
tion from the side onto the
lower casing section (see
Section 1.6).
2 x 6
Swegon reserves the right to alter specifications.