The Docking Of Unit Sections; Fan/Filter Sections; Fixation, Front Of The Unit - Swegon GOLD RX Series Instructions For Installation Manual

1.10 The docking of unit sections

The illustrations in Section 1.10 show a GOLD RX air handling unit with fan arrange-
ment 2. The principle is however the same for the other air handling units.

1.10.1 Fan/filter sections

1.10.2 Fixation, front of the unit

20 www.swegon.com
GB. GOLDINE120.130915
Place the fan, filter and possible coil heat exchanger
sections on top of one another, according to the
delivery configuration (see Section 1.9). Fix the upper
section to the lower section with the bolts supplied,
screwing them into the pre-fitted rivet nuts (a total of
4 pcs.).
Locate the fan/filter sections by the heat exchanger
section according to the delivery configuration (see
Section 1.9). Fix the fan/filter sections at thefront side
of the air handling unit to the heat exchanger section
with the bolts supplied, screwing them into the pre-
fitted rivet nuts (a total of 2x4 pcs.).
Swegon reserves the right to alter specifications.