Technical Data; Gas Detector - Dräger HFG 000 Series Technical Manual

Table of Contents

Advertisement

12

Technical data

12.1

Gas detector

Ambient conditions:
during operation and storage
Degree of protection
Alarm volume
Orientation
Battery
Dimensions
Weight (without pump)
Weight (with pump)
Update interval for the display and sig-
nals
Bluetooth
Bluetooth
1) Tested without the pump or calibration adapter.
Operating time in normal conditions (diffusion mode)
X-am 3500/8000:
With CatEx and 3 EC sensors
With 3 EC sensors
X-am 8000 only:
With IR and 3 EC sensors
With CatEx, PID and 3 EC sensors
With CatEx, IR and 3 EC sensors
With IR, PID and 3 EC sensors
With PID
1) The nominal operating time of the gas detector at an ambient temperature of 20 to 25 °C,
1013 mbar, alarms less than 1 % of the time, power-save mode display activated. The actual
operating time varies depending on the ambient temperature and pressure and battery and
alarm conditions.
In pump mode: If the gas detector is used permanently in pump mode, the
operating time is reduced by approx. 2 h.
|
Technical manual
X-am® 3500/8000
®
range
®
range with rubber boot
-20 to +50 °C
700 to 1300 hPa
10 to 90 % (briefly up to 95 %) rel. hum.
1)
IP 67
Typically 100 dB (A) at a distance of
30 cm
Any
Lithium-ion battery, rechargeable, 4.8 V,
6.0 Ah, 28.8 Wh, 250 g
approx. 179 x 77 x 42 mm (H x W x D)
Typically 495 g depending on which
sensors are equipped, without transport
harness
Typically 550 g, depending on which
sensors are equipped, without transport
harness
1 s
Approx. 10 m (line of sight)
Approx. 5 m (line of sight)
1)
:
typically 24 h
typically 120 h
typically 22 h
typically 17 h
typically 14 h
typically 16 h
typically 42 h
Technical data
73

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hfg 001 seriesX-am 3500X-am 8000

Table of Contents