Accessing The Fuse Block And Standard Control Module; Accessing The Fuses - Toro 30344 Operator's Manual

Accessing the Fuse Block and
Standard Control Module
Removing the Control-Panel Plate
1. Remove the 4 thumb screws that secure the
control-panel plate to the fuel tank
1. Fuel tank
2. Thumb screw
2. Lift up the control-panel plate
3. Disconnect the electrical connectors from the switches
and warning lights as necessary to access the fuse block
or the standard control module.
Installing the Control-Panel Plate
1. Connect the electrical connectors to the switches and
warning lights that you disconnected in step
Removing the Control-Panel Plate (page
2. Align the 2 tabs at the bottom of the side panel with
the 2 slots in the frame for the console
(Figure 57).
Figure 57
3. Control-panel plate
(Figure 57).
45).
(Figure
1. Tabs (side panel)
3. Align the slots in the top of the control-panel plate
with the holes in the flange of the fuel tank
4. Assemble the control panel plate to the flange of the
fuel tank with the 4 thumb screws
removed in step
Plate (page

Accessing the Fuses

The fuse block and fuses are located under the control panel
(Figure 59).
3 of
58).
1. Fuse block
45
Figure 58
2. Slots (frame—console)
(Figure
1 of Removing the Control-Panel
45).
Figure 59
(Figure 57).
57) the you