Zeiss Humphrey Matrix 800 User Manual page 98

8-8
Networking Configuration
Note: In order to ensure secure domains on your share folder, set up a shared user group of
known and trusted users. Name the group Authenticated Users. To create an
Authenticated Users group, see the applicable Windows XP website or follow the steps
below.
1. Open Computer Management
• Click Start, and then click Control Panel. Click Administrative Tools, and then
double-click Computer Management.
2. In the console tree, click Groups.
• Computer Management > System Tools > Local Users and Groups > Groups
3. Click Action, and then click New Group.
4. In Group name, type the name for the new group: Authenticated Users.
5. In Description, type a description of the new group.
• To add one or more users to the group, click Add.
6. Click Create, and then click Close.
To add a member to the Authenticated Users group:
1. Open Computer Management
• Click Start, and then click Control Panel. Click Performance and Maintenance,
click Administrative Tools, and then double-click Computer Management.
2. In the console tree, click Groups.
• Computer Management > System Tools > Local Users and Groups > Groups
3. Right-click the group in which you want to add a member, point to All Tasks, click Add
to Group, and then click Add.
4. Click Look in to display a list of domains from which users and groups can be added to
the group.
5. In Location, click the domain containing the users and computers you want to add,
and then click OK.
6. In Name, type the name of the user or group you want to add to the group, and then
click OK.
• If you want to validate the user or group names that you are adding, click Check
Names.
Humphrey Matrix User Manual 2660021138935 Rev. F 2015-11