Zeiss Humphrey Matrix 800 User Manual page 33

System Settings – Export
Figure 2-3 System Settings – Export Screen
Default Export Location: The default export location sets the location when Export is
selected as an Automatic End of Test Action on the Testing Screen (System Settings (F5) >
System Settings – Testing
Testing) (see
location, select the CD-R/W, DICOM (if DICOM Gateway is enabled), Network Share, or
USB radio button. For Network Share and USB, select a location from the corresponding
drop-down menu. For Network Share, you must have previously added network shared
folders to select them here (see
information on USB storage devices see
Network Share and USB, you can also select a folder on the Network Share or USB device
by selecting the browse button (
Device on page 2-11) and Selecting a Subfolder in a Network Share
8-17).
Note: The USB drop down menu has only one location. You don't need to select it. Several
locations can be in the list only if a USB hub is used.
You can select PDF, JPEG, or XML as the data export format (see
Results on page 6-3 for a description of each format). If you selected DICOM Archive,
Humphrey Matrix User Manual
Setting Up the Instrument
on page 2-5). To set the default export
Add Network Shared Folders
USB Storage Devices
Selecting a Folder on a USB Storage
) (see
2660021138935 Rev. F 2015-11
2-7
on page 8-14). For
on page 2-10. For
on page
Printing/Saving Test