Table of Contents
Advertisement
8-16
Networking Configuration
Add a Shared Folder (Share)
You need to add at least one network shared folder for the Matrix to use for the Backup,
Export, and Save As locations.
1. To see a computer's shared folders, click the expand/collapse icon(
Available Shares column. To add a shared folder to the list of saved shares, select
the shared folder you want by clicking on it, and then click the Arrow button (
between the list of available shares and saved shares (see 2.).
2. A dialog appears where you can rename the shared folder, if desired (see
8-14).
Figure 8-14 Save Shared Location Dialog
3. Click OK to add the shared folder to the list of saved shares.
4. You can now select the shared folder in the Network Share drop-down menu of the
Backup, Export, and Save As screens
USB Storage Devices
on page 2-10, and
6-3, and all data management functions
5. If you want to remove a shared folder from S
select the Remove button.
Note: If you remove a shared folder that is currently selected as a Network Share, the first
shared folder in the S
S
AVED
HARES
no other shared folders in the list, the Network Share will be disabled.
6. To see the properties of a selected shared folder, or to rename it, select it and then
select the Properties button.
Note: Always perform a Database Backup after adding shared folders or connecting for
FORUM. This ensures that the user settings .txt file is stored and setup information is
available if connectivity is lost and has to be restored. Shared and network printer setup
information, however, does not get stored in the .txt file. Restoring the .txt file only sets the
default local printer.
Humphrey Matrix User Manual
(System Settings – Backup
Printing/Saving Test Results
((7) Database
Management).
S
AVED
HARES
list will be selected as the Network Share. If there are
2660021138935 Rev. F 2015-11
) in the
)
Figure
on page 2-9,
on page
list, select it and then
Advertisement
Table of Contents
