Zeiss Humphrey Matrix 800 User Manual page 149

(B) OfficeMate PMS Instructions
Instructions for Using OfficeMate Practice Management
Software (PMS) with the Matrix Model 800 (serial port
connectivity)
Note: OfficeMate configuration is intended for an IT network administrator. Your network
administrator can provide you with correct configuration information. For assistance in the
U.S., call CZM at 800-341-6968. Outside the U.S., contact your local CZM distributor. For
OfficeMate assistance, contact OfficeMate Customer Support.
Serial Connectivity Kit
The Matrix Serial Connectivity Kit includes a special serial cable with a 90 degree angle for
use in connecting OfficeMate to the Matrix serial port. For more information, see the
Humphrey Matrix Serial Connectivity Kit User Instructions.
OfficeMate PC Requirements
• Windows XP
• ExamWriter version 7.3 or later
• 9 pin RS-232 port
Note: RS-232 to USB converters are not supported.
• Connection must be COM 1 only
• PC must have Windows .NET Framework 2.050727. Check Microsoft Updates on your
computer. Go to www.microsoft.com/downloads/
• OM Matrix Gateway must be running on the PC. This is a free download from
OfficeMate. Install and reboot your computer to run the OM Matrix Gateway. Go to
http://www.officemate.net/omkb/article.aspx?ID=19629. If the link has expired,
search the internet for OM Matrix Gateway.
• The PC platform should have a 32-bit OS. If your PC has a 64-bit OS, configure a
virtual 32-bit environment to allow the OM Matrix Gateway to function correctly.
Note: Always start up and open OfficeMate/ExamWriter® prior to starting the Matrix.
Humphrey Matrix User Manual
OfficeMate PMS Instructions
for help.
2660021138935 Rev. F 2015-11
B-1