Zeiss Humphrey Matrix 800 User Manual page 142

A-2
DICOM Gateway
Figure A-1 DICOM Gateway Configuration Diagram
Configuration Overview
The process for your complete DICOM Gateway solution includes the following steps that
you will need to perform:
1. DICOM Server Setup: Set up your DICOM storage server to recognize the AE Titles of
your Matrix instruments that will be connecting through the DICOM Gateway. This is a
potentially complex and time-consuming process whose details depend on your EMR
and which should only be attempted by someone who has expert knowledge of your
EMR system (e.g., an IT or DICOM network administrator).
2. Network the Matrix: Configure your Matrix instrument to connect to your network
with an Ethernet cable. See your IT, EMR/PMS, or PACS administrator and
Networking Configuration
3. Configure DICOM Gateway: Configure the DICOM Gateway to communicate with the
designated Storage and Modality Worklist servers and perform a connection test. See
DICOM Gateway Configuration
4. Set Automatic Export of PDF at End of Test: See
a DICOM System on page
5. Use DICOM Gateway: Query your Modality Worklist server for requested exams,
perform these exams and export them to your DICOM System in ePDF format, either
automatically, as described in Step 4 above, or manually, by saving them to your
DICOM System, as described in
Humphrey Matrix User Manual
for more information.
on page A-3 for more information.
Automatic End of Test Export to
A-3 for more information.
Printing/Saving Test Results
2660021138935 Rev. F 2015-11
(8)
on page 6-3.